News-Yingchuang Building Technique (Shanghai)Co.Ltd. (WinSun)
CN EN
Demystified! What's so amazing about 3D printed isolation wards? Randi Platform Enterprise's Artifact to Fight the Epidemic

In the battle against the new coronavirus, timely isolation has become the top priority for epidemic prevention and control. Adequate isolation wards can not only concentrate and isolate patients diagnosed with infection and suspected patients, effectively prevent the spread of the epidemic, but also provide patients with a more professional and comfortable treatment environment, which will help their early recovery. It can be said that sufficient and timely isolation of wards will fight for more precious time and space for fighting the epidemic, thus saving more lives.

During the epidemic, Randi International think tank platform company Yingchuang Construction Technology Co., Ltd. donated 15 3D printed isolation wards independently developed by its independent research and development to the People's Hospital of Xianning City Center, Hubei Province, in the severely affected area, which solved the problems for frontline medical workers and patients Anxious. On February 12, 15 sets of isolation wards printed in one day came to the people of Hubei in the most sincere and simple way. At the same time, Yingchuang's technology research and development team is still racing against time to develop a series of 3D printed building products to fight against new crown pneumonia, such as white angel lounges, highway epidemic prevention posts, etc., and will donate to hospitals and places in need.

The picture shows 15 3D printed isolation wards donated by Landi International think tank platform enterprise Yingchuang Construction Technology Co., Ltd. to Xianning Central People's Hospital

Randi International think tank always pays close attention to the actual use of 3D printed isolation wards. On February 13, according to the feedback from Mr. Jinxue, the chief of the equipment department of Xianning Central Hospital, the 3D printed isolation ward has been equipped with equipment, connected to power, and arranged for the patient to move in. Today, Randi International Think Tank conducted an online interview with Yingyi Ma, chairman of Yingchuang Construction Technology Co., Ltd., on whether the 3D printed isolation ward that the public cares meets the requirements of isolation and medical care, whether it is safe and secure, whether it is ecologically friendly, and whether it is sustainable Issues were communicated in depth.

I. "Ecological toilet": Avoid the transmission of new crown virus through feces

The picture shows the ecological toilet equipped with a 3D printed isolation ward

On February 13, according to the Ministry of Science and Technology, Academician Zhong Nanshan and Academician Li Lanjuan's team isolated a new type of coronavirus from stool samples of patients with neocoronary pneumonia. This finding suggests that feces may be a new route of transmission of neocoronavirus. Therefore, proper disposal of the feces of infected persons is essential. How will 3D printed isolation wards treat patient feces?

In this regard, Ma Yihe said that each 3D printed isolation ward is carefully equipped with an "ecological toilet". The toilet is designed to separate wet and dry stools automatically without the need for water flushing. The "ecological toilet" is not connected to the outside world and will not be discharged into the sewer, so it will not pollute the outside environment. The feces of patients will be recovered 100%, and organic biological bacteria will be used for centralized decomposition and treatment, which is very suitable for the isolation needs of infected patients.

2. "Turn waste into treasure": two to three times more intense than traditional houses

The picture shows a 3D printed building material processed from industrial solid waste and urban demolition of construction solid waste

According to Ma Yihe, donation of 15 3D printed isolation wards in Xianning Central People's Hospital was completed in one day. According to the production capacity of all the factories in Yingchuang, up to hundreds of 3D cottages can be printed in a day. So fast has broken people's imagination, compared with traditional buildings, is 3D printed buildings really safe and reliable?

The materials used for 3D printed buildings are not traditional sandstone cement, but some so-called "garbage", such as industrial solid waste and construction solid waste for urban demolition. After the separation and adhesion of impurities through Yingchuang's patented technology, the waste can be turned into a treasure. The strength of this type of building material is two to three times higher than that of traditional reinforced concrete houses. Ma Yihe said that 3D printed houses are not only strong, airtight, but also very earthquake-resistant. The 3D printed houses currently used to isolate wards can also be used as emergency shelters in the event of future earthquakes and other disasters. Therefore, the 3D printed house used as an isolation ward is very strong and reliable.

3. "Change on demand": sustainable use and extensive use scenarios

The picture shows the 3D printing isolation ward hoisting process

The 3D printed isolation ward has undoubtedly played an important role in solving the "emergency" in the epidemic situation, but where do these buildings go after the epidemic is over? Will the speed and efficiency of 3D printed buildings cause waste of new space resources and subsequent demolition and reconstruction problems?

In this regard, Ma Yihe explained to the staff of Randi International think tank that 3D printed small buildings can be flexibly moved because no foundation is needed. The 15 isolation wards sent to Xianning City were hoisted and transported by cranes and trucks. After the epidemic was over, they could be transported to other places where needed. In addition, all 3D printed buildings can be “rebuilt” and broken and reassembled, and their building materials can be recycled and used sustainably.


In addition, the advantages of 3D printed buildings in terms of ecological environment protection, flexibility and personalization make them have a wide range of application scenarios. Not only isolation wards, homestays, art cabins, public toilets, bus stations, landscape sculptures, etc. can be easily implemented.


During the interview, Ma Yihe said that the fight against the epidemic was a common battle for all Chinese. Yingchuang will spare no effort to devote wholeheartedly with the people of the whole country, and make every effort to donate 3D printing products to the places and hospitals in need, and give back to the society with love and dedication. Randi International Think Tank will continue to use the platform's resource advantages to tap, cultivate, and promote outstanding technology companies under the new globalization and the fourth industrial revolution, and contribute scientific and technological strength to fight the new coronavirus.


Related News
Yingchuang 3D printing construction technology debuted for the first time
2020-05-27

China net · beautiful Suzhou news on the morning of May 24, the 2020 Yingchuang "dream · road" global 3D printing construction technology and product purchase press conference was held in Shanghai Qingpu Yingchuang recycling industrial park, and in the afternoon of that day, participants came to the factory of Suzhou Industrial Park, the birthplace of Yingchuang to visit and study.

More
[heavyweight] the world of colorful 3D printing architecture opens, and the era of global large-scale procurement is coming

On the morning of May 24, 2020, the press conference of global 3D printing construction technology and product procurement of "Dream Road" of Yingchuang in 2020 was held in Shanghai Qingpu Yingchuang recycling industrial park. This is a drum to urge the country to return to work and production in an all-round way, and also a march to promote the transformation and upgrading of the real economy. Under the background of the fourth industrial revolution, Yingchuang 3D printing building technology has realized the intelligent remote management of buildings, the artificial intelligence and 3D printing of building equipment by combining the application of 5g, artificial intelligence, big data, cloud computing, blockchain, industrial Internet and other innovative technologies Big data analysis of new materials for printing construction ink, blockchain management of regeneration and recycling resources, and application of 3D printing construction globalization industrial Internet technology. This year, Yingchuang, together with the highway traffic environment research center of the Highway Science Research Institute of the Ministry of transport, Suzhou Waterway office, Suzhou Ring Expressway, wosarun and other units, has realized the application of 3D printing construction technology in traffic and water conservancy projects. This is another innovation in the field of "new infrastructure"! Yingchuang brings the sound barrier of waterway, riverbed and Expressway into the new economic era of 3D printing.

Back