News-Yingchuang Building Technique (Shanghai)Co.Ltd. (WinSun)
CN EN
Yingchuang 3D printing green building To be a promoter of new technology and new industry —— Landi International think tank promotes to develop "One Belt And One Road" emerging technology project

On November 24, Landi international think tank held a seminar on 3D printing technology to help "One Belt And One Road" technology industry development in Winsun Suzhou industrial park. Representatives from the government, enterprises, think tanks, scientific research institutions, financial institutions and other fields attended the conference to discuss from a diversified perspective. It is an important conference for cross-boundary communication. Qiu Baoxing, a state council counselor and former vice minister of housing and urban-rural development, pointed out at the meeting that the application of 3D printing technology in the construction field is a revolutionary technology and represents the future development trend, but at the same time, it is necessary to accelerate a series of breakthroughs in ink technology, on-site printing, standardization and new structural system.

3D printing technology helps "One Belt And One Road" technology industry development seminar

In recent years, 3D printing architecture has become a hot topic in the industry. However, these seemingly beautiful 3D printing technologies and buildings cannot be rapidly popularized in China, because they need to pass a large number of national certification and approval first. How to effectively promote the development of this new technology? In this context, Landi international think tank hosted this seminar to discuss the application of 3D printing in the field of architecture, including value significance, application scenarios, industry prospects, existing problems, solutions, market space, standard setting, industrial clusters, promotion value in countries and regions along the "One Belt And One Road".

Vice chairman of the foreign affairs committee of the 12th NPC, chairman of the "One Belt And One Road" international think tank expert committee of the Chinese academy of social sciences and chairman of the expert committee of Landi international think tank Zhao Baige chaired the seminar. Representatives from all walks of life spoke freely and discussed from different angles and at different levels. Their ideas stirred and the atmosphere of the meeting was very warm.

Counsellors of the state council and former vice-minister of housing and urban-rural development Qiu Baoxing attended the meeting and delivered a speech

Related standards of 3D printing buildings are the focus of this conference. On August 23, 2016, the ministry of housing and urban-rural development issued the "2016-2020 construction informatization development outline", pointing out that "research on 3D printing equipment and materials in the construction industry should be actively carried out. Combined with the application of BIM technology, explore the application of 3D printing technology in the production of building parts and components, and carry out demonstration application.” 3D printing of buildings can improve the renewable utilization rate of building resources, reduce energy consumption, improve construction efficiency, reduce labor intensity and cost, which is of special significance to the transformation and upgrading of China's construction industry.

Qiu Baoxing, a state council counselor and former vice-minister of housing and urban-rural development, said the application of 3D printing technology in the construction sector is an inevitable trend. In view of the existing problems, he pointed out that four breakthroughs should be made: First, to further breakthrough in ink technology; Secondly, it is necessary to solve the problem of on-site printing and realize the construction of robot on-site automation; Third, we should solve the problem of inclusiveness. While maintaining our own advantages, we should also include other construction techniques and adhere to a variety of new structures and designs. Fourth, strengthen standardization and theoretical in-depth research, take a new structural system. “ There are no details in front of the trend, details are created”, 'a little breakthrough in the new structural system is a small revolution, a big breakthrough is a revolution,' he said.

Ma Yihe, chairman of Yingchuang construction technology (Shanghai) Co.,Ltd., introduced the development of 3D printing architecture

Yingchuang construction technology (Shanghai) Co.,Ltd. is an enterprise that has been working in the field of 3D printing for 16 years. It is also the world's first high-tech enterprise that truly realizes 3D printing architecture. Chairman Ma Yihe introduced the basic situation of enterprise development at the meeting. The company has 129 3D printing technology patents, leading the world in the 3D printing construction industry. With the help of "One Belt And One Road", yingchuang 3D printing green building project has landed cooperation in "One Belt And One Road" countries and regions such as dubai, Saudi Arabia, Iraq, the United States, Germany and Australia.

Recently, Yingchuang took the lead in implementing 3D printing construction technology to create a new industry of environmental protection, so that various solid wastes can be recycled into 3D printing "ink" and various plastic buildings. The technology will be widely used in construction waste, industrial waste, mine tailings and other waste into treasure. Infrastructural projects for the benefit of the people, including park facilities, bus stations, public toilets, underground sewage Wells, septic tanks, riparian lines, coastlines, sound barriers, as well as farmers' care homes and other rural revitalization products can be printed. This has achieved the development goals of energy conservation, environmental protection, resource regeneration, green production and environmental improvement, and taken on a new historical mission.

Ye Beihong, a professor-level senior engineer at Shanghai institute of architectural sciences, introduced the construction standards of 3D printing

Landi international think tank has been committed to leading and promoting the development of science and technology industry in countries and regions along the "One Belt And One Road".

Yingchuang 3D printing architecture integrates intelligence, technology and environmental protection, attracting the attention of Landi international think tank.

In the seminar, Yuan Zhenggang, President of Glodon Company Limited, proposed that the combination of 3D printing and digitalization is quite important. 3D construction requires high positioning technology and construction accuracy, and the future building model may undergo revolutionary changes on this basis. Therefore, Guanglianda will also develop 3D technology software to support 3D printing.

Wang Yuwu, chairman of Guangzhou Heli construction technology Co.,Ltd., introduced the situation of housing construction in Africa. At present, there is a huge demand for affordable housing construction in many countries. In the future, 3D printing construction technology can be tried to be applied in Africa.

Wu Yiqiang, vice President of Jiangxi Zhongyang Construction Group Co.,Ltd., said that in the future, prefabricated buildings and 3D printing can complement each other and promote the industrialization and industrialization of buildings. The group is willing to seek opportunities for cooperation and common development with Yingchuang.

Feng kui, secretary general of urban and small town reform and development center of national development and reform commission, Tan Xiaodong, director of Beijing standard research technology development center, Zhou Jiahua, general manager of Zhongyang Dexin Technology Co.,Ltd, Liu Yang, deputy general manager of Shanghai Baosteel new construction technology Co.,Ltd and other enterprises from all walks of life attended the meeting. Ye Beihong, senior engineer at the professor-level of Shanghai institute of architectural sciences, published the 3D printing building standards, inspection and quality report.

They fully expressed their views and discussed how to cooperate, form industrial clusters and jointly promote the development of 3D printing architecture technology. The meeting shared cutting-edge views, promoted genuine cooperation and established an efficient exchange mechanism.

Some participants took a group photo at Yingchuang Suzhou industrial park

The meeting finally reached consensus that with the deepening of "One Belt And One Road" international cooperation, 3D printing technology will be further expanded in the application of all walks of life. Therefore, the next step is to establish cooperation alliance, technology principle and development of the industry chain material classification and related standard, build support 3D printing technical specifications for the development of the most basic, further play to the 3D printing technology in the "area" construction of important role, especially in 3D intelligent building, green building, and other fields to promote the development of science and technology innovation.

So far, more than 70 universities and research institutes around the world are studying 3D printing construction technology. In such an important time node, Landi international think tank called the expert committee held seminars and related enterprises, with full and such a built in 3D printing technology leading enterprise as a case, build cooperation platform, help to strengthen exchanges and cooperation between businesses, common to seize the strategic opportunity, take "area" Dongfeng implementation of enterprise development. Landi international think tank has played a good leading and promoting role.

Director Zhao Baige summarized the seminar

Director Zhao Baige summarized the seminar and pointed out that the new technology needs all aspects of support. Landi international think tank is committed to gathering forces from all sides to promote all-round innovation in policy, mechanism and implementation path, and to be a promoter of new technologies and industries. This is the first time for Landi international think tank to conduct a symposium on a single project that represents the future development direction of science and technology. It is the starting point of the project cultivation project of emerging technology enterprises on Landi platform and a landmark meeting.

In the future, we will continue to devote ourselves to the exploration, cultivation and promotion of technology enterprises on Landi platform, and to the integrated top-level design of emerging new technologies, products, standards and brands. With the advent of the fourth industrial revolution, an important force will be formed to jointly promote social development.

Related News
Yingchuang 3D printing green building To be a promoter of new technology and new industry —— Landi International think tank promotes to develop "One Belt And One Road" emerging technology project
2018-11-26

On November 24, Landi international think tank held a seminar on 3D printing technology to help "One Belt And One Road" technology industry development in Winsun Suzhou industrial park. Representatives from the government, enterprises, think tanks, scientific research institutions, financial institutions and other fields attended the conference to discuss from a diversified perspective. It is an important conference for cross-boundary communication. Qiu Baoxing, a state council counselor and former vice minister of housing and urban-rural development, pointed out at the meeting that the application of 3D printing technology in the construction field is a revolutionary technology and represents the future development trend, but at the same time, it is necessary to accelerate a series of breakthroughs in ink technology, on-site printing, standardization and new structural system.

More
Back